Valhalla DSP ValhallaShimmer v1.0.4 / v1.2.2 [WiN, MacOSX]

WiN：R2R小组| 2018年7月31日| 3.1 MB
MAC：团队CODESHiNE | 2020年12月24日| 14兆字节

和叔叔一起来，一切正常！听到天使喇叭和恶魔长号。你被邀请了！ValhallaShimmer是为大声音而设计的算法混响，从音乐厅到泰姬陵再到Valhalla大厅。所有滑块均设计为实时调整，并具有平滑的响应，从而避免在更改设置或自动执行控件时单击。同时，该算法已经过高度优化，因此您可以获得巨大的混响声音，而不会占用您的CPU。

ValhallaShimmer的核心是高品质的混响器，旨在产生平滑的衰减，既致密又无色。

有几种混响模式可用：
-通过调整“反馈”，“扩散”和“大小”控件，可以微调混响信号的起音，维持和衰减。
-可以将调制控件设置为产生微妙的模式加粗，闪烁的弦乐整体式衰减以及较旧的Lexicon霍尔算法的独特随机调制。
-两个音调控件和“色彩模式”选择器允许将音色从明亮和闪亮调整为更自然的暗淡衰减，类似于在大空间中吸收空气所产生的衰减。

此外，ValhallaShimmer能够对反馈信号进行音高偏移。

有5种音高转换模式可用：
-单音，通过Shift值将反馈上移或下移。
-双通道，其中反馈通过Shift值上下移动（并行）。
-SingleReverse，其中每个晶粒在音高移位之前都已反转。这会导致音调转换声音比单音模式更流畅。
-DualReverse。与双重模式相似，但具有相反的纹理，可以使音调转换声音更平滑。
-旁路，关闭音高转换（对于“标准”混响声音很有用）。

通过将Shift量设置为+12半音，并将Feedback设置为0.5或更大，可以产生经典的Eno / Lanois“微光”声音（在此处和此处了解更多）。该算法可以创建各种各样的其他声音，范围从弹簧式混响到“反向”混响，再到通常与高端硬件处理器相关的闪闪发亮的打击垫。

现在已更新至1.2.2版！VST3，已签名并经过公证的Mac安装程序（可用于Big Sur），已签名Windows安装程序。

WiN: Team R2R | 31 July 2018 | 3.1 MB
MAC: Team CODESHiNE | 24 December 2020 | 14 MB

Come With Uncle And Hear All Proper! Hear Angel Trumpets And Devil Trombones. You Are Invited! ValhallaShimmer is an algorithmic reverb designed for BIG sounds, from concert halls to the Taj Mahal to the Halls of Valhalla. All of the sliders have been designed to be tweaked in real time and have a smoothed response to avoid clicks when changing settings or automating the controls. At the same time, the algorithm has been highly optimized, so you get a huge reverb sound without straining your CPU.

At its core, ValhallaShimmer is a high quality reverberator, designed to produce a smooth decay, that is both dense and colorless.

There are several reverberation modes available:
– By adjusting the Feedback, Diffusion and Size controls, the attack, sustain and decay of the reverb signal can be fine tuned.
– The modulation controls can be set to produce subtle mode thickening, glistening string ensemble-esque decays, and the distinctive random modulation of the older Lexicon hall algorithms.
– Two tone controls and the Color Mode selector allow the timbre to be adjusted from bright and glistening to a more natural dark decay, similar to that produced by air absorption in large spaces.

In addition, ValhallaShimmer has the ability to pitch shift the feedback signal.

There are 5 pitch shift modes available:
– Single, where the feedback is shifted up or down by the Shift value.
– Dual, where the feedback is shifted both up and down (in parallel) by the Shift value.
– SingleReverse, where each grain is reversed before it is pitch shifted. This results in a smoother pitch shifting sound than the Single mode.
– DualReverse. Similar to the Dual mode, but with reversed grains, for a smoother pitch shifting sound.
– Bypass, which turns off the pitch shifting (useful for “standard” reverb sounds).

By setting the Shift amount to +12 semitones, and the Feedback to 0.5 or greater, the classic Eno/Lanois “shimmer” sound is produced (learn more about that here, here and here). A wide variety of other sounds can be created by the algorithm, ranging from spring-esque reverbs to “reverse” reverbs, to glistening pitch shifted pads that are usually associated with high end hardware processors.